- Laboratory Heating Equipments[22]
- Electronic & Instrument Enclosures[1]
- Abrasive Tools[16]
- Glass Product Making Machinery Parts[1]
- Metal Processing Machinery Parts[12]
- Industrial Furnace[8]
- Plastic Processing Machinery Parts[2]
- Industrial Heater[43]
- Other Welding & Soldering Supplies[1]
- Welding Rods[4]
- Other Mechanical Parts[38]
- Other Non-Metallic Mineral Deposit[10]
- Other Ore[20]
- Other Metals & Metal Products[2]
- Quartz Tubes[1]
- Refractory[53]
- Tungsten Crucibles[1]
- Tungsten Powder[10]
Hot standard Single spiral type silicon carbide heater element
silicon carbide heater element
-Material: Good quality green SiC powders
-Diameter: 8-54mm
-Length: 240-4000mm
Hot standard Single spiral type silicon carbide heater element
YUHAO Brand SiC heating element has many types,such as GD type,GC,U,W,SG,SD type.The SiC heating elements have hot and cold zones.Its main material is selected super quality green silicon carbide.So it can be used in various high temperature electric furnaces and other electric heating devices.
Features:
1. Withstands as high as 1600°C (surface temperature),
2. Generates high heat output per unit surface area, approximately 5-10 times than the output of Nichrome wire,
3. High strength and excellent shock resistance,
4. Heat source is free of noise and air pollution.
Single spiral type
1.Single spiral type elements are made from very dense silicon carbide, featuring a return spiral groove allowing connection at one end.
2.The resistance and allowable surface loadings of the Single spiral Type are substantially higher than other silicon carbide elements, consequently operating voltages are higher and current draw lower.
3.This feature can lead to significant savings in both control equipment and wiring.
4.Single spiral elements are energy conserving, convenient and easy to install due to the same-end terminal structure.
Technical Parameter of Rod type silicon carbide heating elements
OD (Diameter) | HZ (Hot Zone) | CZ (Cold Zone) | OL (Total Length) | Resistance |
8mm | 100-300mm | 60-200mm | 240-700mm | 2.1-8.6 ohms |
12mm | 100-400mm | 100-350mm | 300-1100mm | 0.8-5.8 ohms |
14mm | 100-500mm | 150-350mm | 400-1200 | 0.7-5.6ohms |
16mm | 200-600mm | 200-350mm | 600-1300 | 0.7-4.4 ohms |
18mm | 200-800mm | 200-400mm | 600-1600 | 0.7-5.8 ohms |
20mm | 200-800mm | 250-600mm | 700-2000mm | 0.6-6.0 ohms |
25mm | 200-1200mm | 250-700mm | 700-2600mm | 0.4-5.0 ohms |
30mm | 300-2000mm | 250-800mm | 800-3600mm | 0.4-4.0 ohms |
35mm | 400-2000mm | 250-800mm | 900-3600mm | 0.5-3.6 ohms |
40mm | 500-2700mm | 250-800mm | 1000-4300mm | 0.5-3.4 ohms |
45mm | 500-3000mm | 250-750mm | 1000-4500mm | 0.3-3.0 ohms |
50mm | 600-2500mm | 300-750mm | 1200-4000mm | 0.3-2.5 ohms |
54mm | 600-2500mm | 300-750mm | 1200-4000mm | 0.3-3.0 ohms |
Spring Clamps are used to hold the connection straps in compression around the circumference of HyRod SiC element. It is made from stainless steel because it is assumed that the terminal ends are well ventilated and unlikely to exceed a temperature of 250°C.
Connection straps are used to connect element to bind post or element to element. It is made from high purity aluminium which provides high electrical conductivity, flexibility and resistance to oxidation at high temperatures.
